../jquery.fs.zoomer.min.js

2BE3 series water ring vacuum pump and compressor

Introduction:

2BE3 series water ring vacuum pumps are the products with high efficiency and energy saving, which are manufactured by our company combining with the advanced technology of the imported products. They can not only save energy, but also suitable for long-term use and operation. Running in the rough vacuum condition, water ring pump working conditions are often extremely harsh. 2BE3 series products are designed for suction various gases.2BE3 can be used with various actuating devices, such as belt, gear box; synchrony motor, variable speed drives etc. In addition, in order to save space, more than two or at most four sets of the 2BE3 series pumps can be driven by one motor simultaneously.

When set a middle wall in the casing, the left and right parts of 2BE3 can run under different vacuum respectively ,if the pressure tolerance between the two sides is lower than 80kP,one pump can completely work like two .This feature further enhances the operational flexibility of 2BE3 vacuum pump

Application:


They can be widely used in coal mine, electric factory, petrifaction and chemical industry, food processing and so on.

MAIN FEATURES:

1.The gap, corrosion status, fouling situation can be easily observed by the big inspection port on both sides of the pump cover.
2.BE3 vacuum pump set the suction and discharge flanges both on the top and sides with the same diameter, so on-site installation is more flexible and convenient.
3.All bearings adopt the imported products in order to ensure precise orientation of impeller and high stability during the running.
4.The material of the impeller is welded with nodular iron or steel to ensure the high stability and increase the lifetime of the pump greatly during any hard conditions.
5.The pulley (when the pump is driven by the belt) adopts standard high precise taper bushing pulley to keep the reliable running and increase its lifetime, also it is easy to dismantle.
6.The pump body is made of steel or stainless steel plates to increase the lifetime of the pump
7.Since shaft sleeve is the most easily damaged part, our shaft sleeve is made of stainless steel to increase the lifetime of the pump five times more than the normal material.
8.Special separator built-on the pump can save the space and reduce the noise efficiently.
9.All the castings by the resin sands with great quality, no puttying. With the heat dissipation at its best.
10. The mechanical seals (optional) adopt the imported parts to fully ensure the pump in the long-running process without leakage.

2BE3 series vacuum pump property parameters

Type

 Ultimate vacuum mbar

Pump speed (r/min)

Suction amount
(m3/min)

Motor  power
 (kW)

Transmission type

Motor voltage
 (V)

Weight kg

Suction  caliber
 (mm)

Exhaust
caliber
 (mm)

2BE3 400

160

300

68

75

Belt

380

4960

300

300

323

80

90

Gear box or belt

380

5060

367

85

110

380

5295

393

92

110

380

5400

449

110

132

380

5540

2BE3 420

160

300

90

110

Gear box or belt

380

5740

300

300

330

110

132

380

5870

360

120

132

380

5920

390

126

160

380

6195

420

134

185

380

6335

2BE3 500

160

242

125

130

Gear box

380

8715

350

350

266

145

185

380

9070

294

165

200

380

9075

336

190

250

6KV

11320

372

210

280

6KV

11570

2BE3 520

160

236

150

185

Gear box

380

9730

350

350

266

165

220

6KV

11980

294

205

250

380

11980

336

235

280

380

12150

336

250

315

380

12615

2BE3 600

160

200

180

185

Gear box

380

 

400

400

236

210

250

6KV

 

266

240

280

6KV

 

294

260

315

6KV

 

336

285

350

6KV

 

2BE3 620

160

200

220

220

Gear box

6KV

 

400

400

236

255

280

6KV

 

266

290

350

6KV

 

294

320

400

6KV

 

336

360

450

6KV

 

2BE3 670

160

170

305

315

Gear box

6KV

 

500

500

200

370

450

6KV

 

236

440

560

6KV

 

266

500

630

6KV

 

294

550

800

6KV